Tag Archives: coupling shaft

China supplier Wgp Hydraulic Gear Shaft Coupling with Brake pto shaft cover removal

Product Description

WGP Drum Gear Coupling(JB/T7001-2007)

WGP Drum Gear Coupling With Brake Disc has a brake disc, brake disc can rotate speed by controlling the speed to adjust the machine. As shown in figure WGP with brake drum set type gear coupling is divided into I type and II type 2 forms, the only difference is that the brake disc is different.

WGP Drum Gear Coupling With Brake Disc is an improved type of gear coupling, consisting of inner gear and the same number of teeth of the flange half band coupling parts etc..

WGP Drum Gear Coupling With Brake Disc at work, 2 have the relative angular displacement, relative axial sliding periodic internal and external gear tooth surface, will inevitably lead to tooth wear and power consumption, therefore, the gear coupling needs to work in good condition and seal. The toothed coupling has small radial size and large load capacity. It is usually used for shafting transmission under low speed and heavy load conditions. The high accuracy and dynamic balancing gear coupling can be used for high speed transmission.

·WGP Drum Gear Coupling Main Dimension(JB/T7001-2007)

Type Normal torque
Tn/N·m
Shaft hole diameter d1,d2,d3 Shaft hole length (L) D0 D D2 D4 B F N C C1 C2 C3
Y J1,Z1
WGP1 800 12,14 32 315 122 98 60 58 30 38 30 2
WGP2 1400 22,24 52 315 150 118 77 68 20
WGP3 2800 30,32,35,38 82 60 355 170 140 90 80 49 3 23 25
WGP4 5000 40,42,45,48 112 84 400 200 160 112 90 45 3 29 17 3
WGP5 8000 80,85,90 172 132 500 225 180 128 100 45 3 41 19
WGP6 11200 100 212 167 630 245 200 145 112 44 5 48 20
WGP7 16000 100,110 212 167 710 272 230 160 122 5 48 20
WGP8 22400 100,110,120 212 167 710 290 245 176 136 5 48 20
WGP9 28000 130,140 252 202 800 315 265 190 140 58 5 53 28
WGP10 45000 160 302 242 800 355 300 225 165 5 63 28
WGP11 63000 160,170,180 302 242 900 412 345 256 180 40 8 66 32 4
WGP12 90000 190,200 352 282 900 440 375 288 207 8 76 32
WGP13 125000 190,200,220 352 282 900 490 425 320 235 50 8 76 32
WGP14 180000 240,250,260 410 330 1000 545 462 362 265 65 10 10

Note:
1.Mass and rotary inertia are approximation calculated by the maximum shaft hole diameter of Y type,without calculating the brake disc.
Table 2 is the mass of brake disc.

·Table 2  Brake Disc Main Dimension,Mass, Rotary Inertia

Brake diameter
D0
T K S Dsmax Mass/kg Rotary inertia
kg·m2
I,II III,IV I,II III,IV I,II III,IV
315 15 10 42 180 155 8.5 6.7 0.116 0.110
355 15 10 45 200 175 11.4 9.9 0.192 0.178
400 15 14 54 255 230 15.2 12.4 0.320 0.287
450 15 16 54 305 280 19.7 15.6 0.550 0.462
500 15 18 54 325 295 25.0 20.0 0.830 0.712
560 15 18 54 350 320 30.7 25.6 1.280 1.127
630 15 20 54 400 360 38.8 33.0 2.060 1.826
710 15 20 54 480 450 46.5 39.4 3.320 2.912
800 15 24 70 540 500 67.8 52.7 5.870 4.810
900 15 24 70 600 560 86.6 70.3 9.300 7.852
1000 20 30 80 620 560 128.8 115.1 17.400 15.650

·Product Show

♦Other Products List

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

Our Company

HangZhou CZPT Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.

FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.

Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T. 

Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
 

Standard Or Nonstandard: Standard
Shaft Hole: 10-32
Torque: >80N.M
Bore Diameter: 19mm
Speed: 4000r/M
Structure: Rigid
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Shaft Collar

What Is a PTO Shaft?

A PTO shaft is a component that is important for a power take-off (PTO) tractor. There are many different kinds of PTOs, including Italian, German, and North American types. The types are categorized into different series, which will have different features such as bearing diameter, cap-to-cap length, and snap rings.

Power Take-Off (PTO) shaft

A PTO shaft is a high-speed working shaft that provides torque and lift. This is an advantage for machines that lift and lower loads and are often used on construction sites. Often, the operating elements are located outside of the operator’s cabin. A safety system is also present that allows the PTO shaft to automatically disengage if it is not turned on.
A safety retaining band 12 is used to secure the PTO shaft. The retaining band extends axially from the PTO shaft S and includes a hinge. The band may be adjustable in width to ensure a correct clearance from the PTO shaft. If necessary, it may also be secured with a conventional over-center clamp.
The power-take-off (PTO) shaft is a crucial part of a tractor. Understanding how power is transferred from the tractor’s engine to the implement requires a better understanding of how this shaft works. The torque and speed of the PTO shaft is essential to developing and utilizing the power of the tractor. There are many ways to measure torque and speed at the PTO shaft, including using a telemetry or encoder system.
A Power Take-Off (PTO) shaft safety retainer is an inexpensive, dependable, and fully effective device that protects the PTO shaft from entanglement. Its effectiveness will become clear after reading the specification. A power take-off shaft safety retainer is not difficult to install and is a good choice for many applications.
PTO shafts have a dangerous tendency to separate from the driven machinery. This poses a safety hazard because the PTO shaft can continue to whip around while the operator is driving the machine. Additionally, it can be very difficult for the operator to reach the power plant when operating PTO-driven equipment.

Safety chain

The safety chain on your PTO shaft is an important component of your tractor’s safety system. A properly guarded PTO can prevent entanglement with people, tools, and objects. Moreover, it reduces the risk of the PTO shaft becoming detached from the tractor. It also prevents people from stepping over the rotating shaft.
When not guarded, a PTO shaft is extremely dangerous. It can cause serious injuries and even death. Proper safety chains can prevent this from happening and protect livestock from damage to the PTO shaft. If you’re looking to purchase a safety chain for your PTO shaft, be sure to get one that fits tightly.
When properly attached, a safety chain can keep the shaft from swinging when the PTO is engaged. A 540-rpm PTO shaft will make more than two complete revolutions in less than five seconds. That means it can wrap someone in five tenths of a second. And if you try to pull away, you’ll get wrapped even tighter!
Another reason to use a safety chain is to prevent injury from clothing getting caught in the drive shaft. A jacket or a sweater can entangle itself around the PTO shaft and cause a serious injury. The clothing can also trap the injured limb against the shaft. Hence, the chain should be removed as soon as possible after the operation is completed.
A safety chain is an essential part of your tractor’s safety system. It prevents an accident from happening because of improper maintenance. A poorly maintained PTO shaft can result in severe injuries or even death. Properly installed and maintained safety chain can help you prevent any kind of PTO shaft accident.
Shaft Collar

Universal joint

A bad universal joint can cause a number of problems for your tractor or implement. These issues may include squeaking or clunking noises when you shift gears, or a shuddering sensation when you brake. If you notice any of these symptoms, it is best to take your vehicle to a mechanic right away for a thorough inspection. If not fixed properly, a bad universal joint can separate from the drive shaft and cause major damage to the tractor or implement.
In order to choose the proper universal joint, you must consider the size of your PTO shaft. Some implements have a diameter of 14 inches or more from the hitch point to the end of the input shaft. The longer distance helps prevent the PTO shaft from bottoming out when making sharp turns. It also prevents the two parts of the shaft from detaching during cornering.
Universal joints are used in agricultural and forestry equipment and other vehicles with large number of rotors. They can be made of different materials. The most common is steel or stainless steel. This material can last for many years. A universal joint is an excellent option for small tractors, lawn mowers, and other agricultural equipment.
The universal joint is also very useful when coupling or extending drive lines. It comes with 2 yokes and a cross kit. The yokes measure 6 x 13/8″ spline, while the cross kit measures 30,2 x 92 mm. The universal joint is made to withstand extreme temperatures. It can be easily disassembled and serviced if necessary.

Square rigid shaft

Torsion is a property of a mechanical system that is affected by changes in torsional rigidity. Torsional rigidity is measured as the torque needed to twist one unit of angular measurement over one unit of length. A shaft with high torsional rigidity will provide a stable mechanical interface.
Different shafts may have different types of collars. The most basic one is a sleeve, which is composed of a thick tube with the same diameter as the shaft. The sleeve is attached to each end of the shaft and has threaded inserts to prevent longitudinal movement.
The PTO shaft also has a safety shield on both ends. It helps to prevent accidents by securing equipment to the tractor. It can be found in domestic and metric shapes. The domestic versions are generally round and domestic shaped, while metric versions are available in a bell, football, star, and metric shape.
An CZPT coupling consists of three pieces: a center plastic disc, two encompassing discs, and a flange. These parts are joined together with a ring that is screwed to the shaft. Some couplings feature oil injection points on the coupling. These can supply oil under pressure to the coupling’s annular grooves. This helps it ‘float’ and aids in the removal.
Another type of flexible coupling is the universal joint. These couplings can be made from a variety of materials, such as rubber, braided metal wire, or woven wire. They can be fabricated to withstand various misalignments. But, unlike rigid couplings, flexible couplings are susceptible to shock and vibration.
Shaft Collar

Economy PTO

Economy PTO shafts are designed to reduce the overall torque and power consumption of a tractor. They can be manually adjusted to engage and disengage the PTO. The cab mounted control/monitoring unit 14 has a switch 19 that selects between the economy and normal driving modes of the PTO. Using the economy mode decreases the engine rpm while using a lower gear ratio to drive the PTO shaft.
Economy PTO shafts come in hydraulic and mechanical versions. Both types are suitable for agricultural tractors. They allow the tractor to operate at a lower rpm, which reduces noise and vibration. They can also be used in a wide range of equipment. The transmission PTO is the oldest type, and is directly connected to the transmission. When the clutch is engaged, it drives the transmission.
Standard PTO shafts are available in various diameters, splines, and speeds. Many implements are designed to be compatible with one or more of these types of PTO shafts. The domestic versions come with a splined front shaft and a square, rectangle, or round secondary shaft.
Another difference between the two types is the number of teeth on the toothed wheel. The economy PTO allows the tractor to run at a lower rpm than the standard PTO. The engine rpm can go as low as 1600 while using the economy PTO. It also helps to reduce noise and vibration in the cab.
The present invention solves these issues and provides an increased level of automation and operator awareness of the PTO function. It also includes a system for detecting the type of PTO shaft and automatically setting the parameters of the control routine.
China supplier Wgp Hydraulic Gear Shaft Coupling with Brake   pto shaft cover removalChina supplier Wgp Hydraulic Gear Shaft Coupling with Brake   pto shaft cover removal
editor by CX 2023-06-13

China Standard Plum-Shaped Elastic Coupling Model Lm Series agri supply pto shaft

Product Description

Plum Elastic Coupling(GB/T5272-2002) 

Plum elastic coupling has the characteristics of vibration reduction, buffering, small radial size, no lubrication and easy maintenance. Suitable for starting frequency, positive and negative rotation, medium and low speed, medium and small power transmission.Not suitable for heavy loads and frequent replacement of elastic elements.

The structure of plum elastic coupling is simple.But when the elastic element is replaced, the half coupling shall be moved axially.LMS type is easy to replace the elastic element without having to move the half coupling.

  Basic Parameter And Main Dimension(GB/T5014-2003)

Type Nominal torque(Tn/N·m) Speed(Np) Shaft hole diameter
(d1,d2,dz)
Length of shaft hole LO D D1 Type of elastic parts Mass Rotary inertia
Hardness of elastic parts LM LMD,LMS Y type J1,Z type L
(recommend)
LM LMD LMS LMD,LMS LM LMD LMS LM LMD LMS
a/HA b/HD L
80+5 60+5 r·min-1 Mm kg kg·m2
LM1
LMD1
LMS1
25 45 15300 8500 12,14 32 27 35 86 92 98 50 90 MT1-a  -b 0.66 1.21 1.33 0.0002 0.0008 0.0013
16,18,19 42 30
20,22,24 52 38
25 62 44
LM2
LMD2
LMS2
50 100 1200 7600 16,18,19 42 30 38 95 101.5 108 60 100 MT2-a  -b 0.93 1.65 1.74 0.0004 0.0014 0.0571
20,22,24 52 38
25,28 62 44
30 82 60
LM3
LMD3
LMS3
100 200 10900
 
6900 20,22,24 52 38 40 103 110 117 70 110 MT3-a  -b 1.41 2.36 2.33 0.0009 0.0571 0.0034
25,28 62 44
30,32 82 60
LM4
LMD4
LMS4
140 280 9000
 
6200 22,24 52 38 45 114 122 130 85 125 MT4-a  -b 2.18 3.56 3.38 0.002 0.005 0.0064
25,28 62 44
30,32,35,38 82 60
40 112 84
LM5
LMD5
LMS5
350 400 7300
 
5000 25,28 62 44 50 127 138.5 150 105 150 MT5-a  -b 3.60 6.36 6.07 0.005 0.0135 0.0175
30,32,35,38 82 60
40,42,45 112 84
LM6
LMD6
LMS6
400 710 6100
 
4100 30,32,35,38 82 60 55 143 155 167 185 185 MT6-a  -b 6.07 10.77 10.47 0.0114 0.0329 0.0444
40,42,45,48 112 84
LM7
LMD7
LMS7
630 1120 5300 3700 35*,38* 82 60 60 159 172 185 205 205 MT7-a  -b 9.09 15.30 14.22 0.5712 0.0581 0.571
40*,42*,45,48,50,55 112 84
LM8
LMD8
LMS8
1120 2240 4500 3100 45*,48*,50,55,56 112 84 70 181 195 209 170 240 MT8-a  -b 13.56 22.72 21.16 0. 0571 0.1175 0.1493
60,63,65 142 107
LM9
LMD9
LMS9
1800 3550 3800 2800 50*,55*,56* 112 84 80 208 224 240 200 270 MT9-a  -b 21.40 34.44 30.70 0.1041 0.2333 0.2767
60,63,65,70,71,75 142 107
80 172 132
LM10
LMD10
LMS10
2800 5600 3300 2500 60*,63*,65*,70,71,75 142 107 90 230 248 268 230 305 MT10-a  -b 32.03 51.36 44.55 0.2105 0.4594 0.5262
80,85,90,95 172 132
100 212 167
LM11
LMD11
LMS11
4500 9000 2900 2200 71*,71*,75* 142 107 100 260 284 308 260 350 MT11-a  -b 49.52 81.30 70.72 0.4338 0.9777 1.1362
80*,85*,90,95 172 132
100,110,120 212 167
LM12
LMD12
LMS12
6300 12500 2500 1900 80*,85*,90*95 172 132 115 297 321 345 300 400 MT12-a  -b 73.45 115.53 99.54 0.8205 1.751 1.9998
100,110,120,125 212 167
130,140,150 252 202
LM13
LMD13
LMS13
11200 2000 2100 1600 90*,95* 172 132 125 323 348 373 360 460 MT13-a  -b 103.86 161.79 137.53 1.6718 3.667 3.6719
100*,110*,120*,125* 212 167
130,140,150 252 202
LM14
LMD14
LMS14
12500 25000 1900 1500 100*,110*,120*,125* 212 167 135 333 358 383 400 500 MT14-a  -b 127.59 196.32 165.25 2.499 4.8669 5.1581
130*,140*,150 252 202
160 302 242

NOTE:
1.Mass and rotary inertia are the approximation calculated according to the recommended minimum axial hole.
2.Diameter of shaft hole with* can be used for Z type shaft hole.

3.a.b is the code for 2 different materials and hardness of elastic parts.

Product Show
 

♦Other Products List

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

Our Company

HangZhou CZPT Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.

FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.

Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T. 

Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

 

Standard Or Nonstandard: Standard
Shaft Hole: 10-32
Torque: 50-70N.M
Bore Diameter: 14mm
Speed: 8000r/M
Structure: Flexible
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Shaft Collar

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

A Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft CollarOne of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft CollarA PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
China Standard Plum-Shaped Elastic Coupling Model Lm Series   agri supply pto shaftChina Standard Plum-Shaped Elastic Coupling Model Lm Series   agri supply pto shaft
editor by CX 2023-06-08

China Made in China CNC Milling Turning Parts Automatic Parts Shaft CNC Machining Sleeve Coupling Drive Screw Stepped Steel Shaft pto shaft danger

Merchandise Description

 

Item Description

Enterprise kind Manufacturing unit/company

Support

CNC machining
Turning and milling
CNC turning
OEM areas

Substance

(1) Aluminum:AL 6061-T6,6063,7075-T
(2)Stainless steel:303,304,316L,17-4(SUS630)
(3)Metal:4140,Q235,Q345B,20#,forty five#
(4)Titanium:TA1,TA2/GR2,TA4/GR5,TC4,TC18
(5)Brass:C36000(HPb62),C37700(HPb59),C26800(H68)
(6)Copper, bronze, magnesium alloy, Delan, POM, acrylic, Laptop, and many others.
Provider OEM/ODM avaliable

Complete

Sandblasting, anodizing, Blackenning, zinc/Nickl plating, Poland
Powder coating, passivation PVD plating titanium, electrogalvanization
Chrome plating, electrophoresis, QPQ
Electrochemical sprucing, chrome plating, knurling, laser etching Logo
Main tools CNC machining middle (milling equipment), CNC lathe, grinding device
Cylindrical grinding machine, drilling equipment, laser slicing machine
Graphic structure Stage, STP, GIS, CAD, PDF, DWG, DXF and other samples
Tolerance +/-.003mm
Floor roughness Ra0.1~3.two
Inspection Comprehensive tests laboratory with micrometer, optical comparator, caliper vernier, CMM
Depth caliper vernier, common protractor, clock gauge, inner Celsius gauge

Thorough Photos

Merchandise Parameters

Content Offered
Aluminum Stainless Metal Brass Copper Plastic Iron
AL2571 SS201 C22000 C15710 POM Q235
ALA380 SS301 C24000 C11000 PEEK Q345B
AL5052 SS303 C26000 C12000 PVC 1214 / 1215
AL6061 SS304 C28000 C12200 Abdominal muscles 45#
AL6063 SS316 C35600 and so forth. Nylon 20#
AL6082 SS416 C36000   PP 4140 / 4130
AL7075 etc. C37000   Delrin 12L14
and many others.   and so on.   and many others. and so on.
Surface area Treatment
Aluminum Elements Stainless Steel Components Steel Elements Brass Parts
Very clear Anodized Polishing Zinc Plating Nickel Plating
Colour Anodized Passivating Oxide black chrome plating
Sandblast Anodized Sandblasting Nickel Plating Electrophoresis black
Chemical Film Laser engraving Powder Coated Powder coated
Brushing Electrophoresis black Heat therapy Gold plating
Sprucing Oxide black Chrome Plating etc.
Chroming etc and so forth  
and so forth      
TOLERANCE
The smallest tolerance can reach +/-.001mm or as for each drawing ask for.
DRAWING Format
PFD Step Igs CAD Solid etc

Packaging & Delivery

Firm Profile

HangZhou Shinemotor Co.,Ltd located in HangZhou Metropolis, ZheJiang Province of China.
Largely specializes in creating, production and selling all types of custom-made metal and plastic parts.

Our factory move SGS, ISO9001/ ISO9001/ ISO14001 verification, areas can be commonly employed in the fields of automobile,
health-related instruments, electronic communications, industrial and buyer purposes and so on.

We have introduced a sequence of superior and higher overall performance generation gear imported from Japan and ZheJiang :
Higher precision cnc lathes, 5/6 axis cnc machining facilities, plane grinding & centerless grinding devices,
stamping equipment, wire cut machines, EDM and many other higher-precision CNC products.
Our inspection products contains: projector, Second, 2.5D, CMM, hardness testing equipment, resource microscope, and many others.

We devoted to developing and creating sorts of brass, aluminum, steel, stainless steel
And plastic machining areas, stamping elements, and also CZPT design and style and production.

We firmly hold the concept of  ” customer is the first, honesty is the fundamental, accrete acquire-win “. 
Committed to supplying you with high-high quality products and excellent support!
We sincerely search ahead to generating a better potential by mutually useful cooperation with you.
 

FAQ

1. Are you a manufacturing facility or a buying and selling organization?

A: We are a manufacturing facility which has been specialised in cnc machining & automatic producing for far more than 10 several years.

2. Exactly where is your manufacturing facility and how can I check out it?
A: Our factory is situated in HangZhou town and you can get a lot more detailed info by browsing our website.

3. How extended can I get some samples for examining and what about the price tag?
A: Usually samples will be done inside of 1-2 times (automatic machining elements) or 3-5 working day (cnc machining areas).
The sample cost depends on all details (dimensions, content, complete, etc.).
We will return the sample cost if your order amount is excellent.

four. How is the warranty of the goods good quality management?
A: We hold the tightend good quality managing from extremely begining to the finish and aim at a hundred% error free of charge.

5.How to get an correct quotation?
♦ Drawings, images, detailed dimensions or samples of products.
♦ Materials of merchandise.
♦ Normal buying amount.
 Quotation inside of 1~6 hours

 

US $1.99-9.99
/ Piece
|
100 Pieces

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Soft Wire Shaft
Shaft Shape: Real Axis

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Business type Factory/manufacturer

Service

CNC machining
Turning and milling
CNC turning
OEM parts

Material

(1) Aluminum:AL 6061-T6,6063,7075-T
(2)Stainless steel:303,304,316L,17-4(SUS630)
(3)Steel:4140,Q235,Q345B,20#,45#
(4)Titanium:TA1,TA2/GR2,TA4/GR5,TC4,TC18
(5)Brass:C36000(HPb62),C37700(HPb59),C26800(H68)
(6)Copper, bronze, magnesium alloy, Delan, POM, acrylic, PC, etc.
Service OEM/ODM avaliable

Finish

Sandblasting, anodizing, Blackenning, zinc/Nickl plating, Poland
Powder coating, passivation PVD plating titanium, electrogalvanization
Chrome plating, electrophoresis, QPQ
Electrochemical polishing, chrome plating, knurling, laser etching Logo
Major equipment CNC machining center (milling machine), CNC lathe, grinding machine
Cylindrical grinding machine, drilling machine, laser cutting machine
Graphic format STEP, STP, GIS, CAD, PDF, DWG, DXF and other samples
Tolerance +/-0.003mm
Surface roughness Ra0.1~3.2
Inspection Complete testing laboratory with micrometer, optical comparator, caliper vernier, CMM
Depth caliper vernier, universal protractor, clock gauge, internal Celsius gauge

###

MATERIAL AVAILABLE
Aluminum Stainless Steel Brass Copper Plastic Iron
AL2024 SS201 C22000 C10100 POM Q235
ALA380 SS301 C24000 C11000 PEEK Q345B
AL5052 SS303 C26000 C12000 PVC 1214 / 1215
AL6061 SS304 C28000 C12200 ABS 45#
AL6063 SS316 C35600 etc. Nylon 20#
AL6082 SS416 C36000   PP 4140 / 4130
AL7075 etc. C37000   Delrin 12L14
etc.   etc.   etc. etc.
SURFACE TREATMENT
Aluminum Parts Stainless Steel Parts Steel Parts Brass Parts
Clear Anodized Polishing Zinc Plating Nickel Plating
Color Anodized Passivating Oxide black chrome plating
Sandblast Anodized Sandblasting Nickel Plating Electrophoresis black
Chemical Film Laser engraving Powder Coated Powder coated
Brushing Electrophoresis black Heat treatment Gold plating
Polishing Oxide black Chrome Plating etc.
Chroming etc etc  
etc      
TOLERANCE
The smallest tolerance can reach +/-0.001mm or as per drawing request.
DRAWING FORMAT
PFD Step Igs CAD Solid etc
US $1.99-9.99
/ Piece
|
100 Pieces

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Soft Wire Shaft
Shaft Shape: Real Axis

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Business type Factory/manufacturer

Service

CNC machining
Turning and milling
CNC turning
OEM parts

Material

(1) Aluminum:AL 6061-T6,6063,7075-T
(2)Stainless steel:303,304,316L,17-4(SUS630)
(3)Steel:4140,Q235,Q345B,20#,45#
(4)Titanium:TA1,TA2/GR2,TA4/GR5,TC4,TC18
(5)Brass:C36000(HPb62),C37700(HPb59),C26800(H68)
(6)Copper, bronze, magnesium alloy, Delan, POM, acrylic, PC, etc.
Service OEM/ODM avaliable

Finish

Sandblasting, anodizing, Blackenning, zinc/Nickl plating, Poland
Powder coating, passivation PVD plating titanium, electrogalvanization
Chrome plating, electrophoresis, QPQ
Electrochemical polishing, chrome plating, knurling, laser etching Logo
Major equipment CNC machining center (milling machine), CNC lathe, grinding machine
Cylindrical grinding machine, drilling machine, laser cutting machine
Graphic format STEP, STP, GIS, CAD, PDF, DWG, DXF and other samples
Tolerance +/-0.003mm
Surface roughness Ra0.1~3.2
Inspection Complete testing laboratory with micrometer, optical comparator, caliper vernier, CMM
Depth caliper vernier, universal protractor, clock gauge, internal Celsius gauge

###

MATERIAL AVAILABLE
Aluminum Stainless Steel Brass Copper Plastic Iron
AL2024 SS201 C22000 C10100 POM Q235
ALA380 SS301 C24000 C11000 PEEK Q345B
AL5052 SS303 C26000 C12000 PVC 1214 / 1215
AL6061 SS304 C28000 C12200 ABS 45#
AL6063 SS316 C35600 etc. Nylon 20#
AL6082 SS416 C36000   PP 4140 / 4130
AL7075 etc. C37000   Delrin 12L14
etc.   etc.   etc. etc.
SURFACE TREATMENT
Aluminum Parts Stainless Steel Parts Steel Parts Brass Parts
Clear Anodized Polishing Zinc Plating Nickel Plating
Color Anodized Passivating Oxide black chrome plating
Sandblast Anodized Sandblasting Nickel Plating Electrophoresis black
Chemical Film Laser engraving Powder Coated Powder coated
Brushing Electrophoresis black Heat treatment Gold plating
Polishing Oxide black Chrome Plating etc.
Chroming etc etc  
etc      
TOLERANCE
The smallest tolerance can reach +/-0.001mm or as per drawing request.
DRAWING FORMAT
PFD Step Igs CAD Solid etc

Safety Precautions For a PTO Shaft

When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.
Shaft Collar

Safety precautions

One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.

Types of pto shafts

PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Shaft Collar

Reaction time

It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.

Standardization

The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Shaft Collar

Safety chains

The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.

Shield

The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
China Made in China CNC Milling Turning Parts Automatic Parts Shaft CNC Machining Sleeve Coupling Drive Screw Stepped Steel Shaft     pto shaft dangerChina Made in China CNC Milling Turning Parts Automatic Parts Shaft CNC Machining Sleeve Coupling Drive Screw Stepped Steel Shaft     pto shaft danger
editor by czh 2023-01-29

China Customize Front Drive Shaft Assembly Driver Coupling Sprinter Axle Rotating Shaft Transmission Shaft tractor pto shaft types

Design: ECOSPORT, Accent, Swift, COROLLA
Year: 2017-2019, 2018-2019, 2011-2016, 2012-2571, 2016-2571
OE NO.: 4213-5710
Car Fitment: Ford, Toyota, SUZUKI, Hyundai
Dimension: .8M
Material: Steel
Design Amount:
Guarantee: 1 Months
Solution Title: Push Shaft
Type: propeller shafts
OEM: Accpet
Quality: Prime
Key phrase: generate shafts
Color: Black
Apply for: Universal Driver Shaft
Edge: cardan shaft
Condition: Brand name new
Merchandise: shaft travel
Packaging Particulars: 23.8 x 8 x 8 cm16.3 kg
Port: Main ZheJiang /HangZhou

ODM&OEMRecognized
Merchandise titleDrive Shaft
BundleRegular or custom made
AdvantageExperienced factory
A lot more Products Company Profile Assistance Customization&OEM Production Gear Certifications Packaging And Logistics FAQ Q1: Are you buying and selling business or manufacturing unit? A1:We are OEM manufacturing unit. Q2: Can you produce or modify the propeller shaft we want? A2:Sure, Samples for improvement are warmly welcomed. We have rich expertise in creating and modifying the shafts.Q3:What is Moq for each and every items.If we have in stock?A3:Sample take a look at and sample orders could be acknowledged.Generally MOQ is 1pcs.This autumn: How can l be certain the elements fit my motor vehicle?A4:Make sure you advice the elements no to our sales,and affirm with them.Merely send out theimages of the elements to our sales or ask our product sales to send you picture to verify.Q5:What other provider can you offer you?A5:OEM support,we often warmly welcome consumer to ship us samples to build a new solution line.

drive shaft coupler
China Customize Front Drive Shaft Assembly Driver Coupling Sprinter Axle Rotating Shaft Transmission Shaft     tractor pto shaft typesChina Customize Front Drive Shaft Assembly Driver Coupling Sprinter Axle Rotating Shaft Transmission Shaft     tractor pto shaft types
editor by czh

Best near me shop made in China – replacement parts – PTO shaft manufacturer & factory Single maruti swift drive shaft price Diaphragm Coupling Flexible Coupling for Djm with ce certificate top quality low price

We – EPG Team the biggest agricultural gearbox and pto factory in China with 5 diverse branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

Best  near me shop  made in China - replacement parts - PTO shaft manufacturer & factory Single  maruti swift drive shaft price Diaphragm Coupling Flexible Coupling for Djm with ce certificate top quality low price

travel shaft wira 1.5 authentic Adhering 350z carbon fiber driveshaft to a thousand pto shaft “Survival pto spline by truck pto shaft components Top quality, 52123551aa Development 540 pto to a thousand adapter by 540 pto shaft coupler Technology john deere pto output shaft & pto clutch adjustment Credit rating”, The firm will consistently increase item functionality to fulfill the growing customer specifications in the arduous design of operate. EPG specializing in the manufacture of rotocultivator ploughshares and other non-standardized farm machinery chopping equipment.

JMII Type Diaphragm Coupling Without having Sinking Hole

JM collection diaphragm flexible coupling is extensively utilized in equipment and products market, metallurgy, mines, petroleum, chemical, electrical electricity, shipbuilding, lifting transportation, textile, mild industry, agricultural machinery, printing equipment and water pump, enthusiast, and many others. in the transmission of electricity device.

The main traits of JM Collection Diaphragm Coupling
1.Payment two axis misalignment of the potential, and tooth variety coupling can be significantly more than a double angle displacement, radial displacement of the tiny, adaptable, enabling a certain axial, radial and angular displacement.
two. Obvious damping result, no sounds, no use and tear.
3.Higher transmission efficiency, up to 99.86%. Particularly suitable for medium and substantial pace large electrical power transmission.
4.Adapt to high temperature (-80+three hundred) and severe atmosphere, and can be in shock, vibration, protection and dynamic situations.
five.Easy framework, gentle excess weight, little size, practical assembly and disassembly. With no shifting the device can be disassembled (with intermediate sort), no want of lubrication.
six.Properly convey the rotational velocity, the procedure has not turned poor, can be utilized for the transmission of precision machinery.

                 

JMII Sort Diaphragm Coupling Main Dimension(JB/T9147-1999)

Type Nominal torque
Tn
Peak torque
Tmax
Max
Speed
nmax
Bore
Diameter
d,d1
Bore length D D1 t Torsional rigidity×106 Mass Rotary
inertia
Jone type Y
type
L
(advise)
L
N·m N·m r·min-1 mm N·m/rad kg kg·m2
JMII1 40 63 10700 fourteen 27 32 35 80 39 8±0.2 0.37 0.9 0.0005
sixteen,18,19 30 42
20,22,24 38 fifty two
twenty five,28 forty four 62
JMII2 63 100 9300 20,22,24 38 fifty two 40 92 53 0.45 1.four 0.0011
25,28 44 sixty two
thirty,32,35,38 sixty 82
JMII3 100 200 8400 twenty five,28 44 sixty two 45 102 63 0.56 2.one 0.002
thirty,32,35,38 60 82
forty,forty two,forty five eighty four 112
JMII4 250 400 6700 thirty,32,35,38 sixty eighty two 55 128 77 11±0.3 0.eighty one 4.2 0.006
forty,forty two,forty five,forty eight,fifty,55 eighty four 112
JMII5 500 800 5900 35,38 60 82 65 145 91 1.2 6.4 0.012
forty,forty two,forty five,forty eight,fifty,55,fifty six eighty four 112
60,63,65 107 142
JMII6 800 1250 5100 40,forty two,forty five,forty eight,fifty,fifty five,fifty six eighty four 112 75 168 105 14±0.3 1.42 9.6 0.571
sixty,63,sixty five,70,71,seventy five 107 142
JMII7 1000 2000 4750 45,48,50,55,56 84 112 80 180 112 15±0.four 1.nine 12.5 0.0365
sixty,sixty three,sixty five,70,seventy one,75 107 142
80 132 172
JMII8 1600 3150 4300 fifty,fifty five,fifty six 84 112 200 120 2.35 15.five 0.057
60,63,65,70,seventy one,75 107 142
eighty,eighty five 132 172
JMII9 2500 4000 4200 fifty five,56 84 112 205 120 20±0.4 2.seven 16.5 0.065
60,63,65,70,seventy one,seventy five 107 142
80,eighty five 132 172
JMII10 3150 5000 4000 55,fifty six eighty four 112 90 215 128 20±0.4 3.02 19.5 0.083
60,sixty three,65,70,71,75 107 142
80,85,ninety 132 172
JMII11 4000 6300 3650 60,sixty three,65,70,seventy one,seventy five 107 142 100 235 132 23±0.5 3.46 25 0.131
80,85,ninety,ninety five 132 172
JMII12 5000 8000 3400 63,sixty five,70,71,seventy five 107 142 250 145 3.sixty seven 30 0.174
eighty,85,90,ninety five 132 172
100 167 212
JMII13 6300 10000 3200 sixty three,65,70,71,seventy five 107 142 110 270 155 5.2 36 0.239
80,eighty five,90,95 132 172
a hundred,a hundred and ten 167 212
JMII14 8000 12500 2850 sixty five,70,71,seventy five 107 142 115 300 162 27±0.six 7.eight 45 0.38
eighty,85,ninety,95 132 172
a hundred,110 167 212
JMII15 10000 16000 2700 70,71,75 107 142 125 320 176 8.43 55 0.5
80,85,ninety,ninety five 132 172
100,110,one hundred twenty,a hundred twenty five 167 212
JMII16 12500 20000 2450 seventy five 107 142 140 350 186 32±0.7 10.23 75 0.85
eighty,85,ninety,95 132 172
a hundred,one hundred ten,a hundred and twenty,125 167 212
one hundred thirty 202 252
JMII17 16000 25000 2300 eighty,85,90,95 132 172 145 370 203 10.ninety seven 85 1.one
100,110,120,125 167 212
a hundred thirty,one hundred forty 202 252
JMII18 20000 31500 2150 90,ninety five 132 172 165 400 230 13.07 115 1.sixty five
a hundred,one hundred ten,120,one hundred twenty five 167 212
one hundred thirty,a hundred and forty,a hundred and fifty 202 252
a hundred and sixty 242 302
JMII19 25000 40000 1950 a hundred,one hundred ten,a hundred and twenty,125 167 212 175 440 245 38±0.9 14.26 150 2.69
a hundred thirty,140,one hundred fifty 202 252
160,170 242 302
JMII20 31500 50000 1850 a hundred and ten,120,a hundred twenty five 167 212 185 460 260 22.thirteen 170 3.28
one hundred thirty,a hundred and forty,a hundred and fifty 202 252
a hundred and sixty,170,one hundred eighty 242 302
JMII21 35500 56000 1800 120,125 167 212 200 480 280 38±0.nine 23.seven 200 4.28
a hundred thirty,a hundred and forty,a hundred and fifty 202 252
160,one hundred seventy,one hundred eighty 242 302
a hundred ninety,200 282 352
JMII22 40000 63000 1700 a hundred thirty,one hundred forty,one hundred fifty 202 252 210 500 295 24.six 230 5.eighteen
one hundred sixty,a hundred and seventy,one hundred eighty 242 302
one hundred ninety,200 282 352
JMII23 50000 80000 1600 one hundred forty,150 202 252 220 540 310 44±1 29.seventy one 275 7.seven
a hundred and sixty,one hundred seventy,180 242 302
a hundred ninety,two hundred,220 282 352
JMII24 63000 10000 1450 one hundred fifty 202 252 240 600 335 50±1.2 32.sixty four 380 9.three
one hundred sixty,a hundred and seventy,a hundred and eighty 242 302
a hundred ninety,200,220 282 352
240 330 410
JMII25 80000 125000 1400 one hundred sixty,one hundred seventy,180 242 302 255 620 350 37.sixty nine 410 15.three
190,200,220 282 352
240,250 330 410
JMII26 90000 140000 1300 a hundred and sixty 242 302 275 660 385 50.43 510 20.9
one hundred ninety,200,220 282 352
240,250,260 330 410
JMII27 112000 180000 1200 190,two hundred,220 282 352 295 720 410 60±1.four 71.51 620 32.4
240,250,260 330 410
280 380 470
JMII28 140000 20000 1150 220 282 352 300 740 420 93.37 680 36
240,250,260 330 410
280,300 380 470
JMII29 160000 224000 1100 240,250,260 330 410 320 770 450 114.fifty three 780 43.nine
280,three hundred,320 380 470
JMII30 180000 280000 1050 250,260 330 410 350 820 490 130.76 950 60.five
280,300,320 380 470
340 450 550

Merchandise Photos

♦Other Products Record

Transmission Machinery 
Areas Identify
Design
Common Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Adaptable Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

Our Company
Our firm materials diverse types of products. High high quality and affordable price. We stick to the basic principle of “high quality first, provider 1st, ongoing enhancement and innovation to satisfy the customers” for the administration and “zero defect, zero complaints” as the good quality objective. To EPT our support, we offer the goods with good top quality at the reasonable price.

Welcome to customize goods from our manufacturing unit and remember to give your design drawings or get in touch with us if you want other demands.

Our Services
one.Design Companies
Our design group has expertise in cardan shaft relating to item design and improvement. If you have any wants for your new merchandise or would like to make more improvements, we are here to offer our assistance.

two.Merchandise Services
raw materia EPT → Reducing → Forging →Rough machining →Shot blasting →Heat treatment method →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

three.Samples Process
We could create the sample according to your requirement and amend the sample consistently to meet your need to have.

four.Investigation & Advancement
We typically study the new requirements of the industry and produce the new design when there is new automobiles in the marketplace.

five.Top quality Manage
Every single action should be EPT examination by Professional Workers according to the stHangZhourd of ISO9001 and TS16949.

FAQ
Q 1: Are you buying and selling business or producer?
A: We are a specialist producer specializing in production
a variety of collection of couplings.

Q 2:Can you do OEM?
Sure, we can. We can do OEM & ODM for all the clients with custom-made artworks of PDF or AI structure.

Q 3:How prolonged is your shipping and delivery time?
Generally it is twenty-30 days if the goods are not in inventory. It is according to quantity.

Q 4: Do you give samples ? Is it free or extra ?
Indeed, we could offer the sample but not for free of charge.In fact we have a extremely excellent price tag principle, when you make the bulk purchase then cost of sample will be deducted.

Q 5: How extended is your guarantee?
A: Our Guarantee is twelve month below standard circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling ?
A:one hundred% self-inspection prior to packing.

Q 8: Can I have a visit to your factory ahead of the order?
A: Sure,welcome to pay a visit to our manufacturing unit.

Q 9: What is actually your payment?
A:1) T/T. 2) L/C 

Speak to Us
World wide web:
Insert: No.1 HangZhou Street,Chengnan park,HangZhou City,ZheJiang Province,China
 

Best  near me shop  made in China - replacement parts - PTO shaft manufacturer & factory Single  maruti swift drive shaft price Diaphragm Coupling Flexible Coupling for Djm with ce certificate top quality low price