China Custom 40FT CZPT Gas Oil Liquid Fuel Bulk Cement LPG Powder Diesel Steel Perroleum Tanker Tank Box Truck Cargo Container Transport Dumping Shipping Semi Trailer pto shaft extension tractor supply

Product Description

40CBM 3 Axles Cement Bulk Tank Semi Trailer

Product Instructions

 

LUCKIN VEHICLE supply 40CBM 3 Axles Cement Bulk Tank Semi Trailer, which is specially designed for transportation of large quantities of dried dust materials, such as fly ash, cement, lime powder, ore powder, etc., whose particle diameter is not greater than 0.1mm. Powder Cement Bulk Tanker Trailers use pneumatic unloading. When the vertical height of the unloading reaches 15m, the horizontal conveying distance can reach 5m.

LUCKIN VEHICLE Cement Bulk Carrier Tanker Semi Trailer uses its own engine power to drive the vehicle-mounted air compressor through a power take-off (PTO). The compressed air is sent to the air chamber at the lower part of the sealed tank through the pipelines, then cement on the fluidized bed is suspended into a fluid state. When the pressure in the tank reaches the rated value, the fluidized cement flows through the pipelines for transportation after opening the unloading butterfly valve.

 

Product Details

 

 

40CBM 3 Axles Cement Bulk Tank Semi Trailer
 

Product Parameters

 

Tare weight 10000kg
Size 10700mm*2500mm*4000mm
Volume 45M3
Tank body Q235A/5mm steel sheet                                        
End plate Q235A/6mm .ball shape
Axle 3 axle  CZPT brand  13T
Suspension Mechanical suspension American type local brand
Leaf spring Leaf spring 10pcs*90*13mm
Manhole cover 500mm manhole cover .2 sets
Tire 12R22.5 double star brand 12pcs
Wheel rim 9.0-22.5 better brand     12pcs
Discharge valve 4″disc valve
Discharge pipe 4″seamless steel tube
Outlet pipe 4″rubber hose.6m
Kingpin JOST brand 2″ bolt-in king pin
Landing gear JOST brand two-speed, manual operating ,heavy duty landing gear 24T
Engine Diesel engine: CZPT brand model: 4102.
Air compressor 37 KW, 0.2Mpa. 1000r/Min
Compartment Single                                   
Braking system WABCO RE6 relay valve ;T30/30 spring brake chamber;40L air tanks
ABS Optional
Light LED 8 side lights and 2 rear lights 2 width lamp
Air-charging system 2″main hole.2″check valve .1.5″safe valve.0.4Mpa.gauge
Quadratic blow 1″ diameter check valve
Painting Complete chassis sand blasting to clean rust ,1coat of anticorrosive prime,2coats of final paint
Accessories One standard tool box,one spare tire carrier,one crank,one shaft head wrench,four side light,two rear light
Date of delivery 20 workdays after we received 30% of contract value T/T down payment.

 

Our Advantages

Price advantage:
We sell in factories without middlemen, so our price will be better than that of trading companies.

Quality advantage:
From the moment the customer places an order, we will be equipped with a professional team. Professional personnel are responsible for the design, production, tracking and transportation. We adopt the principle of responsibility system, and the quality can be guaranteed.

Professional advantages:
We have our own R & D team and design team. Our team has received professional training and good education, and is skilled in using CAD, SW and other drawing tools

Service advantages:
The staff will give the most favorable and accurate quotation to the customer within 2 hours according to the customer’s requirements, make the most appropriate purchase scheme for the customer, and formulate the perfect solution according to the customer’s after-sales demand within 10 hours.

RELATED PRODUCTS:

COMPANY INTRODUCTION

Packaging & Shipping

Certifications

 

FAQ

1.What is the delivery date?
It usually takes 15 to 25 days of receiving the deposit.

2.Payment and mode of transportation?
We accept both T/T and L/C .
Bulk, rolling, loading, land transportation, I will actively provide customers with cheaper transportation.

3. If Our Vehicle/Trailer Can Couple With Your Tractor Head ?
– 90% Of The Truck In The Market Can Coupling With Our Vehicle, As Howo, Shacman, Beiben, Volve…
– If Other Brand Truck Head, Please Inform Our Sales Manager Before Order Placing.

4.Can you satisfy my special requirement?
Definitely!We can make the trailers or trucks based on your requirement.

 

Tanker Body Material: 5mm High Strength Wear-Resistance Steel
Volume: 30cbm to 50cbm
Axles: 3 Axles
Tire: 12 Units
Application: Bohai/Kefa Brand Transport Lime, Cement etc
Tank Body Thickness: 3.5mm
Customization:
Available

|

Customized Request

Shaft Collar

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

A Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft CollarOne of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft CollarA PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
China Custom 40FT CZPT Gas Oil Liquid Fuel Bulk Cement LPG Powder Diesel Steel Perroleum Tanker Tank Box Truck Cargo Container Transport Dumping Shipping Semi Trailer   pto shaft extension tractor supplyChina Custom 40FT CZPT Gas Oil Liquid Fuel Bulk Cement LPG Powder Diesel Steel Perroleum Tanker Tank Box Truck Cargo Container Transport Dumping Shipping Semi Trailer   pto shaft extension tractor supply
editor by CX 2023-04-27